Full launch: week of 1 February 2027. Build Partner places are open now

Article

Corrective action that tackles the cause

Corrective actions often say "staff retrained" or "reminded staff to take care". That may be the right response, but it will not help if the cause sits in the process, equipment or instructions around the person.

Start with what actually happened

Talk to the people involved and look at the job, instructions and equipment. Keep the focus on what happened and what needs to change. People are more likely to explain a problem clearly when the aim is to improve the work, not blame someone.

Ask why, more than once

Ask why until you find something you can change. For example, the wrong part was fitted because two parts look the same and are stored in the same bin. Separating or clearly labelling them addresses the cause better than telling the fitter to be more careful.

Choose an action that matches the cause

  • If the instructions were unclear, rewrite them and tell the people who use them.
  • If equipment caused the problem, repair, replace or check it more often.
  • If the task was too easy to get wrong, change the task, add a check or remove the step.
  • If someone lacked a skill, train them, and record the training.

Give it an owner and a date

Give each action one owner and a realistic due date. That makes it clear who is responsible and when it should be done.

Check it worked

After the action is complete, check whether it worked. A second person should review the result before the record is closed.

QMS is planned for January 2027. It is intended to link corrective actions to the problem, show who owns each action and when it is due, and connect relevant document changes. Your team still needs to work out why the problem happened and what should change.

Planned for February 2027: try QMS free for 14 days.

This article provides general information only and is not legal or professional advice. Consider your own circumstances and get advice where needed.

Build Partner programme

Become a Build Partner

Build Partners help shape Document Controller for their industry, at 50% off for 12 months from the day your first card payment goes through: A$150.50/month + GST for 10 full users, instead of A$301/month + GST, and A$9.50/month + GST instead of A$19/month + GST per additional user, for businesses that apply by 31 December 2026. After that, 25% off for as long as they remain paying customers. The Build Partner discount covers the platform licence, the modules you lead and all your users, with no cap on the number of people, and excludes other modules, one-off services, usage charges, other non-subscription charges and Iridium AI Assistant Pro. Build Partners get guided setup and industry alignment with one of our team, their industry pack for the module they lead, as it's released, at their Build Partner discount, first access to new modules and direct input into what we build next.

Build Partner places are for businesses with 10 or more people, and we prefer 20 or more.

Document Controller is coming at launch. A small pilot with up to 3 Build Partners is planned from December 2026, and Document Controller is planned to go on sale from January 2027. We'll confirm your start date when we offer your place.